Interstate 290 (New York)

Interstate 290
Youngmann Memorial Highway

Map of the Buffalo area with I-290 highlighted in red
Route information
Maintained by NYSDOT
Length: 10.24 mi[4] (16.48 km)
Existed: 1958[1] – present
History: Completed mid-1960s[2][3]
Major junctions
West end: I-190 / Thruway in Tonawanda
  I-990 in Amherst
East end: I-90 / Thruway in Williamsville
Highway system

Auxiliary route of the Interstate Highway System
Main • Auxiliary • Business

Numbered highways in New York
Interstate • U.S. • N.Y. (former) • Reference • County

← NY 289 NY 290 →

Interstate 290 (I-290) runs for 10 miles (16 km) near Buffalo, New York from I-90 to I-190. It connects Buffalo with its northern suburbs of Amherst and Tonawanda, and provides a route to Niagara Falls that bypasses the city of Buffalo. I-290 also connects to Interstate 990, and through this connection, provides access to the Amherst Campus of the University at Buffalo. Its official name is the Youngmann Memorial Highway, but locally, it is colloquially referred to as "the two-ninety" and "the Youngmann".

Contents

Route description

I-290 begins at a semi-directional-T interchange with Interstate 190 within view of the Niagara River in an industrial sector of the Buffalo suburb of Tonawanda. The freeway heads east from I-190 into more residential areas of Tonawanda, where it meets NY 384 at a three-quarter cloverleaf interchange. The two missing portions of the cloverleaf, both ramps leading to NY 384 from I-290 eastbound, are replaced by an exit to Elmwood Avenue located slightly west of the NY 384 exit. To the east of NY 384 (and adjacent to the southeasternmost point in the city of Tonawanda), I-290 interchanges with the Twin Cities Memorial Highway (NY 425).

The Youngmann continues east through Tonawanda to the Amherst town line, where it meets US 62 at a second three-quarter cloverleaf interchange. Unlike the interchange with NY 384, all connections are possible between I-290 and US 62 due to a modified ramp linking I-290 westbound to US 62. Past US 62 in Amherst, I-290 turns to the southeast ahead of a semi-directional-T interchange with Interstate 990, a spur to Lockport. Farther east, I-290 meets NY 263 (Millersport Highway) at a cloverleaf interchange and NY 324 and NY 240 at a modified diamond interchange south of the University at Buffalo's Amherst Campus.

Near Williamsville, I-290 turns southward and intersects NY 5 (Main Street) at a modified cloverleaf interchange. I-290 terminates at a semi-directional-T interchange with the New York State Thruway (Interstate 90) a half-mile to the south on the Amherst-Cheektowaga town line.

History

What is now Interstate 290 was originally planned to be designated I-190. The route was renumbered I-290 in 1958 to better reflect the future highway's routing as a connector between two Interstate Highways (or a bypass of Buffalo) rather than a spur.[1] Construction on the expressway began ca. 1962 when work commenced on the section between NY 263 and the New York State Thruway.[5][6] This section was finished by the following year, by which time work had begun on the remainder of the freeway.[7] The section between NY 263 and US 62 was opened to traffic ca. 1964[7][8] while the rest was finished in the mid-1960s.[2][3] The interchange with what is now I-990 was built in 1983.[9]

The expressway was originally named the Power Line Expressway for the high tension power lines that parallel the expressway. It was renamed in the early 1960s[6][8] to serve as a memorial to Elmer G. H. Youngmann, a project engineer who died while the road was being built.[1] The official name of the freeway became the Youngmann Memorial Highway;[3] however, the name Youngmann Expressway has also been frequently used over the years.[8]

Exit list

The entire route is in Erie County.

Location Mile[4] Exit Destinations Notes
Tonawanda 0.00 I-190 / Thruway – Buffalo, Niagara Falls
1 Elmwood Avenue (CR 119) Eastbound exit and entrance
2.58 1A-B NY 384 (Delaware Avenue) No eastbound exit
3.65 2 NY 425 (Colvin Boulevard) Southern terminus of NY 425
5.24 3A-B US 62 (Niagara Falls Boulevard) Single exit 3 westbound
Amherst
6.19 4 I-990 – University at Buffalo, Lockport Southern terminus of I-990
7.31 5A-B NY 263 (Millersport Highway)
8.06 6 NY 240 (Harlem Road) / NY 324 (Sheridan Drive)
9.75 7A-B NY 5 (Main Street)
10.24 I-90 / Thruway – Albany, Erie
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. ^ a b c "Interstate 290". Kurumi. September 7, 2004. http://www.kurumi.com/roads/3di/i290.html#290ny. Retrieved July 18, 2010. 
  2. ^ a b Mobil (1965). New York (Map). Cartography by Rand McNally and Company. 
  3. ^ a b c Esso (1968). New York (Map). Cartography by General Drafting (1969–70 ed.). 
  4. ^ a b "2008 Traffic Volume Report for New York State" (PDF). New York State Department of Transportation. June 16, 2009. p. 207. https://www.nysdot.gov/divisions/engineering/technical-services/hds-respository/NYSDOT%20TVR%202008%20by%20Route.pdf. Retrieved February 1, 2010. 
  5. ^ Sunoco (1961). New York and Metropolitan New York (Map). Cartography by H.M. Gousha Company (1961–62 ed.). 
  6. ^ a b Esso (1962). New York with Sight-Seeing Guide (Map). Cartography by General Drafting (1962 ed.). 
  7. ^ a b Esso (1963). New York Happy Motoring Guide (Map). Cartography by General Drafting (1963 ed.). 
  8. ^ a b c Sinclair Oil Corporation (1964). New York and Metropolitan New York (Map). Cartography by Rand McNally and Company. 
  9. ^ National Bridge Inventory, a database compiled by the United States Department of Transportation Federal Highway Administration, available at www.nationalbridges.com. Accessed October 30, 2007.

External links

South Dakota: 190 — Illinois: 190 • 290 — Ohio: 290 (former) • 490 — New York: 190 • 290 • 390 • 490 • 590 • 690 • 790 • 890 • 990 — Massachusetts: 190 • 290